e2

	Journal "Tekhnologiya Mashinostroeniya"	ISSN 1562-322X
	Contents (�2 2016)
to russian

CONSTRUCTIONAL MATERIALS, PHYSICAL METALLURGY

Zmievskiy V. I., Butrim V. N. � Steels for work in the liquid and gaseous hydrogen medium

The mechanical properties research results strengthed by of austenitic steels, strengthened by work hardening, in liquid and gaseous hydrogen medium with operational. The availability of this strengthen method is shown.
Key words: work hardening strengthen, liquid and gaseous hydrogen

Smirnova N. A. � Laser modification of the aluminum alloys surface

Increase in heat and wear resistance of aluminum alloys can be achieved using laser surface modification by elements such as iron, chromium, nickel, boron, silicon, alloys on Ni�Cr�B�Si basis, and the dispersed particles of titanium and silicon carbides. The casting AK9, AK12MMgN alloys and wrought D16 alloy were investigated after laser modification by radiation continuous CO2 and by solid state lasers. The regularities of structure formation, hardening mechanisms and change the properties of aluminum alloys were disclosed in the laser surface modification process.
The improved mechanical properties of the modified surface layer were obtained after solid solution, intermetallic or carbide hardening. After completion of dissolution of alloying elements in solid solution, the microhardness increased in approximately 1.5 times. With the formation of intermetallic compounds, the microhardness increased in 2�5 times. After laser modification by dispersed particles of carbides, the alloying material little dissolved in aluminum, and did not supersaturate the solid solution.
Key words: laser surface modification, aluminum alloys, alloying powder, structure, properties

SHAPING TECHNOLOGY

Chudin V. N., Sobolev Ya. A. � Shaping of the dashboards for aircraft

The manufacturing technology of the dashboards from magnesium-aluminum alloy using the pressure treatment methods is proposed. Ratios for calculation of the rolling and extrusion modes on the basis of the energy method are obtained. Valuations of shaping critical degrees are given.
The results of technological works are adduced.
Key words: rolling, extrusion, plasticity, creeping, power, pressure, damageability

MACHINE-TOOL AND CUTTING TOOLS PRODUCTION

Kopylov L. V., Petukhov S. L., Bukhteeva I. V., Dmitriev Yu. M., Feofanov A. N. � Predict changes of the functional index for rotary unit

In this paper we prove the ability to predict changes in the functional parameters of rotary units under the influence of dynamic and speed loads during operation. Also we consider schemes of the deformation of a unit, make the original calculations and test the high-speed generator autonomous system.
Key words: rotary units, assembling, precision, technological reliability, elastic deformation performance, finite element method

Gilovoy L. Ya., Molodtsov V. V. � Bearing capacity and rigidity investigation of the connection "HSK" by simulation modelling

The paper contains some evaluates of load capacity and rigidity of HSK tool holder that was carried out by FEM simulation for sizes HSK-A40, HSK-A63 and HSK-A100. The causes and the scheme of the failure are studied in detail. For each testing standard size tool holder was defined a value of critical load. A relationship was established between the force and displacement.
Key words: machine tool; HSK; rigidity; FEM

RECEIPT TECHNOLOGY OF THE PERMANENT CONNECTIONS

Volkov S. S., Bigus G. A. � Influence of physical and mechanical properties on the thermogenesis process during the ultrasonic welding of heterogeneous plastics

It was determined that mutual diffusion of polymer molecules takes place during the dissimilar plastic welding. The process takes place in a temperature range that corresponds to the viscous state of the polymers.
Key words: dissimilar plastic, ultrasonic welding, temperature, amplitude, pressure, frequency, waveguide

SPECIAL TECHNOLOGY

Nozhnitskiy Yu. A., Rybakov G. M., Rozanov M. A. � Energy accumulation by material at the surface plastic deformation

This article describes the mechanism of energy storage capacity material when shot peening of parts, energy. It accumulates in the stretched elastic material and the amount consumed maintaining the compression of the surface layer or at variable constant voltage. The existence of a maximum the stored energy, in which the fatigue strength reaches the maximum value.
Key words: curvature, residual stresses, shot peening, the mechanism of energy storage

METHODS OF CONTROL AND DIAGNOSTICS

Dronov E. A., Barakhov V. I., Samochkin B. N. � X-ray tomography at work through of the machine-building articles manufacturing

The application results of X-ray computerized tomography at work through of the designs and technologies of manufacturing various products are adduced. From an analysis results its facilities are shown. As a result the main directions of the industrial tomography utilization for improving of the machine-building products quality and reliability are formulated as a result.
Key words: X-ray tomography, machine-building products, the results of application possibilities

AUTOMATION OF THE TECHNOLOGY PROCESS TECHNOLOGY AND PRODUCTION, ��

Shokhrina N. V. � The integrated methodology of quality management at the automation of the products design process

The weight coefficients calculation stages of the figured matrix complex elements for quality management integrated methodology at the products designing are considered.
Key words: quality function deployment methodology, hierarchy analysis method, figured matrix, expert evaluation, relative importance, priority, coordination degree

MATHEMATICAL MODELING, NUMERICAL METHODS, PROGRAM COMPLEXES

Brungardt M. V., Vavilov D. V., Lukin R. S., Pikalov Ya. Yu., Shatokhin S. N. � Numerical research of transient processes in a self-adjusting adaptive hydrostatic bearings

The article describes the possibilities of software ANSYS to solving the research problems of load characteristics for adaptive hydrostatic bearings. The calculating model and research methodology of the load characteristics for adaptive hydrostatic spindle bearings with elastically movable supporting sleeve are adduced. The comparison results of the analytical model of static equilibrium equation and the numerical experiment are introduced. The transition process analysis with different values of the shaft specific force is introduced. The calculation results testify to a negative pliability as for sleeve and for shaft. The aperiodic character of the sleeve and shaft movement is derived.
Key words: hydrostatic bearing, adaptive support, the transition process, the negative pliability

STANDARDIZATION, QUALITY PRODUCTION MANAGEMENT

Zorina Yu. G., Parvulyusov Yu. Yu., Fokin G. V. � Management standards of the intellectual property

The civil law relations explanation of the employee and employer in the part of the intellectual official property is adduced. Recommendations over the established requirements optimization for the civil turnover of the intellectual property, licensing policy of the possessor of the right, valuation of the intellectual propertyare results are given.
Key words: intelligent official property, licensing policy, the employee, the employer, the possessor of the right

ECONOMY AND ORGANIZATION OF PRODUCTION

Yudin G. B. � The fuzzy logic applicationin in the risks management tasks and decision acceptance

Increasingly, companies are forced to make decisions under uncertainty conditions that could lead to unforeseen consequences, losses and even bankruptcy. The system was built on fuzzy logic permit to simplify large-scale structure of the risk management system. Fuzzy system permit to model causale relationship, to assess the degree of influence and to range the risks, taking into account the opinion of experts.
Key words: risk analysis, methods of analysis, fuzzy logic, automation of processes, processes information support

Turapin M. V. � Automatic system for the identification and analysis of risks from a supplier of staff and materials

This article provides a brief overview of the principles of application automated identification and risk analysissystem of the raw and material suppliers. The results of the experiment on the analysis of the convergence of a priori and a posteriori assessment of risk factors, symptoms, using a man-machine system identification and analysis of risks from a supplier of raw materials. Analyzed the effectiveness of the application automated system of identification and risk analysis from a supplier of raw and materials.
Key words: Risk analysis, supplier, methods of analysis expert evaluation, automation of processes, processes information support, statistics

FOREIGN EXPERIENCE

Potapova G. S. � Content of foreign journals

INFORMATION

Suslov An. A. � The 9th International specialized exhibition "Termoobrabotka�2015"

Exhibition calendar for 2nd quarter 2016

��: 127015, ��, �/� 65.
��.: +7 (495) 640-7903
e-mail: ic@ic-tm.ru

� 2008-2024, ��
�� - www.itsite.ru