e5

	Journal "Tekhnologiya Mashinostroeniya"	ISSN 1562-322X
	Contents (�5 2013)
to russian

Panov D. V. � "NPO Tekhnomash", FGUP (FSRUE SPA) celebrates 75

History of "Technomash", NPO, foundation is presented, as well as main areas of activities of the institute in the field of rocket industry.
Key words: rocket industry, institute, technologies, equipment

BLANK PRODUCTION

Beschekov V. G., Markin K. N. � Physical analogue of the metal force plasticization method of the aircraft components using spherodynamics effect

A physical analogue of the metal force plasticization method of the aircraft components using spherodynamics effect is described. Dynamics of the spherodynamic vibrating system behaviour at the first three stages of the spherodynamics effect realization is determined. A mathematical model of the metal force plasticization method of the aircraft components using spherodynamics effect is developed.
Key words: spherodynamics effect, force plasticization, mathematical model, aircraft

TECHNOLOGIES AND EQUIPMENT FOR MACHINING, PHYSICOTECHNICAL PROCESSING, NON-CUTTING SHAPING

Astakhov Yu. P., Kocherguin S. A., Morgunov Yu. A., Saushkin B. P. � Effectiveness increase of monowheel blade production

The problem of the structural optimization is considered in order to design of the monowheals production technologies. Some data required to build of the alternated technologies ways are generated. Recommendations are proposed to work out the effective ways for monowheals with different sizes and forms.
Key words: structural technological optimization, blisk, working turbine wheals

Fomin A. A. � Profiled surface formation from material with heterogeneous properties

Research results of a work surface formation of a workpiece with anisotropic properties are covered; the work part has no developed technological location surfaces. A mathematical model of the geometrical error forming during the form milling process of slab unbarked surface, which may be used for prognostication of expected processing accuracy, is developed.
Key words: profiled surface, geometrical error, milling, mathematical model

Zakharov A. G. � Plastic forming technology of the inner fillers for sandwich panels from one-piece material

Different types of constructions and process installations for volumetric filler obtaining for sandwich panels are considered. Compression mechanical test results of the sandwich panels with different inner filler types are described. Guidance for cellular filler application in the mounts of aircraft engine and of airframe is offered.
Key words: sandwich panels, inner filler, composite material, aircraft engine

TOOLING PRODUCTION

Doubovetsky B. O., Zverev I. A. � State-of-the-art and development prospect of the HS spindle cutting machine units

This paper presents the main technical requirements to the performance characteristics of the modern high-speed spindle units (HSSUs) running on rolling bearings as well as the factors stimulating high-speed machining. The recent development trends in HSSUs structures and supporting systems have been considered.
Key words: machine tool, high-speed spindle unit, contact rolling bearing

MACHINING-AND-ASSEMBLY PRODUCTION

Medar A. V. � Prospect of assembling techniques of special engineering products

Implementation maxims of the "dialectical innovation" concept during developing assembling technologies to assure products� quality of special machine-building industry are considered.
Key words: special engineering industry, assembling, quality, system approach

SPECIAL TECHNOLOGIES

Fedorenko M. A., Sanina T. M., Aulov T. M., Markova O. V. � Corrosive attack prevention methods of sealing surface

In this article the reasons of corrosion destruction are analysed. The most widespread protection frames from corrosion are considered. Comparative research is carried out and the most comprehensible is established protective by a covering for the sealing device in working conditions on the cement furnace.
Key words: cement gyrating furnaces, sealing devices, corrosion destruction, galvanization

TESTING AND DIAGNOSTICS METHODS IN ENGINEERING INDUSTRY

Vainberg I. A., Vainberg E. I., Tsyganov S. G. � Topical high-energy tomography experience of strength products for aircraft industry

Industrial X-ray computed tomographs can quantitatively examine an internal spatial structure of a wide range of aircraft produce of any complexity.
Key words: nondestructive testing, tomography, aircraft industry, aeronautical engineering

INSTRUMENT-MAKING TECHNOLOGIES

Boykachev V. N. � EMC-based quality rating techniques and means of equipment and control computer systems

Contemporary approaches to problem-solving of accuracy and reliability increase of the EMC-based check test of air-borne digital electronics are covered. In order to determine critical hardware in the control computer systems, component cells and units of separate equipment, it is suggested to use test-decomposition method, based on application of special test-programmes influencing on the object under test at the moment of reading the values of voltage and radio-noise intensity. Test-programme development requirements are formulated, as well as special features of testing uniprocessor and multiprocessor control computer systems aimed at maxima detection of EMC data.
Key words: electromagnetic compatibility, control computer systems, test program

PROCESSES AND PRODUCTION AUTOMATION AND CONTROL, CAD SYSTEMS

Mescheryakova V. B., Gabriyelyan A. S., Balanda A. S. � End-to-end designing of industrial products in CAD/CAM system NX (Unigraphycs)

Special features of product computer-aided design and part-program creation for NC machine tools in the CAD/CAM integrated system NX (Unigraphics), approaches to creating product digital models and virtual assembly-models aimed at positional checking of their assembly units and following computation of the strength properties are considered.
Key words: solid modelling, surfacing, NC machine tool, postprocessor

MATHEMATICAL MODELLING, CALCULUS OF APPROXIMATIONS AND SOFTWARE SYSTEMS

Moskvin V. K. � Mathematical modelling of a generic driving gear for processing robots

Issues of developing structural pattern and mathematical model of a generic driving gear for an industrial robot to be used as a loading device in the NC machine tools are covered. A structural model of the generic driving gear is designed on the base of the study of transfer functions of the drive segment-components is developed. The obtained data is used for compiling an algorithm and software to compute transition function of a drive of specific version.
Key words: industrial robot, drive, NC machine tool, functional chart, mathematical model, transfer function, stability, algorithm

STANDARDIZATION AND PRODUCT QUALITY CONTROL

Mouravskaya N. P. � Standardization in the field of non-destructive testing

National standards in force and the ones under development in the field of non-destructive testing are covered.
Key words: standardization, nondestructive testing, diagnostics

PRODUCTION ORGANIZATION

Vidakov V. S., Makarov I. I. � Industry database on equipment under operation on the enterprises of Roscosmos

In clause the review of a branch database on the maintained equipment at enterprises of Roskosmos is lead. Necessity of use of the general database for the account and the control over the equipment at the enterprises of space-rocket branch is shown.
Key words: database, park of the equipment, monitoring, inventory

EDUCATION AND PERSONNEL TRAINING

Frolov V. A., Fedorov S. A. � Some activity aspects of technical institute of higher education on introducing competency approach into educational practice of personnel training

The article examines the main aspects implementing of competency approach in higher vocational education.
Key words: educational programs, countinuing education, competence, innovative educational technologies, third-generation Federal Educational Standard, competency approach

FOREIGN EXPERIENCE

Potapova G. S. � Review of the foreign journals

INFORMATION

Ivanov A. N. � The 15th International specializd exhibition MASHEX'2012

��: 127015, ��, �/� 65.
��.: +7 (495) 640-7903
e-mail: ic@ic-tm.ru

� 2008-2024, ��
�� - www.itsite.ru