e8

	Journal "Svarochnoe Proizvodstvo"	ISSN 0491-6441
	Contents (�8 2015)
to russian

SCIENTIFIC-TECHNICAL SECTION

Karchin V. A., Ivanov C. Yu., Vichman V. B. � Calculation methodic for welding parameters definition throw the use of restriction on maximal heating temperature

The task of heat conductivity at arc and electron beam welding of a ring and bar (parallelepiped) of rectangular section with intensive cooling and without surface cooling is considered.
The task analytical solution considering the sizes of a product and welding technology (the welding mode and performance sequence of multilayered joints sites) is adduced. Determination method of welding technology parameters by taking into account restrictions on the maximum heating temperature of a product inspection zone is offered. Replacement possibility of a large-scale ring by a small-scale parallelepiped at research of thermal fields when melt welding is shown.
Key words: heat conductivity, arc welding, electron beam welding, thermal field

Gareev I. S., Pisarev M. S., Sobko S. A. � Laser welding of the details from variegated materials with different thickness

Researches results on laser welding of the details from variegated materials with different thickness are presented. On these researches results it is established that uniform heating of the welded edges is provided due to performance of a welded joint design with a technological bead on a thin-walled detail, with a height of bead of 3�4 times more than detail thickness. Experiments on pulse laser welding of details with different thickness from variegated metals are made. As a result of the conducted experiments it is confirmed that the beads mutual melting without faulty fusion and burn in a welding joint takes place only when keeping the necessary beads sizes.
Key words: laser welding, variegated metals, welded edges, a welded joint

Shmorgun V. G., Bogdanov A. I., Arisova V. N., Trykov Yu. P. � Growth kinetic of the diffusion zone on interface boundary of the explosion welded nickel-aluminum composite material

The phase composition of the burning-off metal in the explosion welded lamellar composite AD1 + NP2 + AD1 and its transformation at hear treatment is investigated. The equations connecting of diffusive zone growth kinetics with energy consumption when explosion welding are received.
Key words: lamellar composite, explosion welding, heat treatment, burned-off metal, a diffusive zone, nickel aluminides

Velichko O. V., Ivanov S. Yu., Karkhin V. A., Lopota V. A., Makhin I. D. � Welding friction stir Al-Mg-Sc alloy high thickness

The developed technology of single-pass welding friction stir (STP) plates of Al-Mg-Sc alloy with a thickness of 11 and 35 mm. Shows the microstructural and mechanical heterogeneity of welded joints. The welds obtained under optimal mode options, free of macro defects. The strength of weld is 98 % strength of the base metal, which is higher than the strength of the joint in fusion welding. The conclusion about the practical suitability of STF Al-Mg-Sc alloy of great thickness.
Key words: welding friction stir, Al-Mg-Sc alloy, microstructure, mechanical properties, heterogeneity

Novosadov V. S. � Brazing technology of the high-temperature heat exchanger by composition solder of the system Cr-Ni-Mn

Researches results on definition of the system Cr-Ni-Mn system composite solder optimum structure, thickness of layers and their drawing sequence on a heat exchanger surface are adduced.
The soldering recommended parameters allowed to receive soldered joints corresponding with requirements of the heat exchangers exploitation.
Key words: composite solder, solder joint, soldering parameters

PRODUCTION SECTION

Chigarev V. V., Malinov V. L., Zusin A. M. � Influence of the carbon content on the wear resistance and properties of the build metal containing metastable austenite

The results of investigations of the influence of the chemical composition of the flux used for welding flux-cored wires for the weld metal of the metastable austenite.
Key words: surfacing, metastable austenite, cored wires, flux

Kovtunov A. I., Starodubtsev A. D., Plakhotny D. I. � Build alloys structure and characteristics of the system nickel�aluminum

For welding on steel intermetallic alloys of the nickel aluminum system twin-arc setting with nickel and aluminum electrode wires is offered. Investigations twin-arc welding processes and properties of weld alloys of nickel-aluminum are carried.
Key words: welding, intermetallic alloys, twin-arc welding

Belyaev A. I., Zvereva I. N., Mikhaylitsyn S. V. � Comparative analysis of the rutile concentrate

The results of research using rutile concentrate from different manufactures in the manufacture of welding electrodes.
Key words: rutile, rutile concentrate, welding electrode, the quality, the weld metal

Zhemanyuk P. D., Petrik I. A., Chigileychik S. L. � Experience of the orbital welding implementation when manufacturing and repairing of the thin-walled piping

The prospects and practical aspects of the use of orbital welding for pipes of aircraft gas turbine engines.
Key words: aircraft engines, the pipeline, orbital welding, soldering

ECONOMIC AND PRODUCTION ORGANIZATION

Rodina V. I., Koshchegulova I. R. � Functioning of the machine-building enterprise at emergency situations

The aim of this work is to develop the model describing the operation of mass service system on manufacture in case of emergency events. The work revealed a general view of the function of changes in technical condition of the machine (the probability of no-failure operation), taking into account the probability of occurrence of an emergency situation. There are also some considered recommendations for labor resources of the enterprise in case of occurrence of various level accidents.
Key words: emergency, the probability, queuing system, the failure intensity, human resources

EDUCATION AND TRAINING

Sigov A. S., Andreev Yu. N., Turko T. I., Fedorkov V. F., Yushkov E. S. � Readiness investigation of the Russian universities and scientific organizations readiness to technological support of the enterprises in the economy real sector

The work outlines the experience of the survey of universities and research institutions to identify organizations leading the most active innovation *innovative activities). Scheme of data collection, criteria for the selection and presentation of information about selected organizations are optimized for solving tasks in support of the process of formation of long-term forms of cooperation between academic and industrial organizations.
Key words: universities, innovative activity, innovative development of universities and research institutions, the capacity of institutions, the partnership between universities and enterprises, now technologies, innovation monitoring organizations, the evaluation of innovation activity of organizations

INFORMATION

Suslov An. A., Suslov D. A. � 14th International exhibition "Nondestructive control and technical diagnostics in the industry" � NDT Russia�2015

* * *

V.L. Russo

BIBLIOGRAPHY

Contents of the foreign journals on welding

��: 127015, ��, �/� 65.
��.: +7 (495) 640-7903
e-mail: ic@ic-tm.ru

� 2008-2024, ��
�� - www.itsite.ru