e8

	Journal "Tekhnologiya Mashinostroeniya"	ISSN 1562-322X
	Contents (�8 2010)
to russian

STRUCTURAL MATERIALS

Nikitin M. S., Zaguirov T. M., Yenikeyev F. U. � Load conditions calculation of the welded plate stock from the prospective superplastic structural materials

Process basic laws of the welded plate stock superplastic shaping are considered; the blank is two sheets welded on closed contour. Primarily the attention is paid to the analysis of grain growth effect on the rheological behaviour and in consequence on shaping duration, gas pressure, to time dependences of the dome height and gas pressure. Computational modelling is carried out in the network of formulation and solution of creep theory boundary value problem using ANSYS bundled software.
Key words: superplastic shaping, modelling, ANSYS, law of pressure feed

TECHNOLOGIES AND EQUIPMENT FOR MACHINING, PHYSICOTECHNICAL PROCESSING, NON-CUTTING SHAPING

Lomova O. S., Lomov S. M., Morgunov A. P. � Effect of a machine tool centres' position error on the radial throw pattern of a component axis

Research results of the part working accuracy increase by the plunge-cut method on circular grinders are covered. Effect of the machine tool centre position error on the radial throw pattern of the centre line of a component at its free rotation in points is considered. It is proved that at free rotation of a component in the points of the machine tool head- and tailstocks mutually positioned with error, spatial axes displacement occurs, which significantly influence on the external cylindrical surface shaping of a component at its machining.
Key words: machine tool, component, working accuracy, external cylindrical surface shaping

Sergeyev S. V. � Influence of the drill self-excited vibrations on the accuracy of orifice shaping by multiedge tool

Calculation dependences of amplitude and radial vibration frequency of drills are obtained. Results of the drill radial vibration computer simulation by ANSYS/LS-DYNA program package are given.
Key words: orifice shaping, end measuring multiedge tool, ability rating, characteristic of drill radial vibrations

Schedrin A. V., Ulyanov V. V., Bekayev A. A. � Mechanism study of the internal cut broaching by predeformed layer

Research results of the force dynamics and laws of the surface layer quality geometric parameter formation at parallel holes cut broaching by predeformed layer are described.
Key words: machining, broaching, orifice, deformed layer

Yenek M., Serebryakov V. I., Schvartsburg L. E. � Influence of the tool plates' PVD coating composition on the surface roughness at steel turning

The paper presents results of investigations about influence of coatings type (TiCr)N and (TiNbZr)N made by PVD technique on the carbide sintered S26 plates, on the carbide sintered S26 places, on the surface roughness while cutting steel process. Impact of the coatings thick and machining parameters on surface roughness was analyzed. The research and results analysis confirm the significant impact of the coatings type and thickness on the surface roughness. This confirms the need for proper selection of the coating material type to the work piece species, particularly in the treatment finishing.
Key words: surface layer, PVD coatings, surface roughness, cutting

TOOLING PRODUCTION

Potapova G. S. � The world machine-tool industry in 2009

An analytical survey of the world machine-tool industry development in 2009 is given.
Key words: machine-tool industry, metal-working machinery, export and import, production and consumption

Mokritsky B. Ya. � Metal-cutting tool working capacity increase

Methods of increasing working capacity of the fast-cutting, hard-alloyed, ceramic and super hard tools are covered.
Key words: working capacity, cutting tool, coating

WELDING, RELATED PROCESSES AND TECHNOLOGY

Soloviov R. Yu., Yudnikov A. S., Ryzhikh Yu. L. � Electroarc strengthening of the components, operating under conditions of abrasive wears

A method of rapid electro-thermo-diffusive hardening of components operating under conditions of abrasive wear and heavy load is worked out. Significant hardening is achieved due to replacing high-carbon steel by less carbon one at soil cultivating machinery production.
Key words: soil cultivating machinery, component, abrasive wear, electroarc strengthening

SPECIAL TECHNOLOGIES

Aliokhin S. N., Kalashnikov A. A., Fetisov I. V., Makhov D. P., Allokhin A. S. �Analysis of the useful resistance energy characteristic at drum rotation

The effect of the mode and peculiarities of movement of textiles in the rotating drun during washing on the power characteristics of the drum type washing machines is considered. The calculation of power consumption for various types of movement of textiles is presented.
Key words: power characteristics, washing machines, drum, mode of movement of textiles, useful resistance

METROLOGY AND MEASUREMENT ASSURANCE

Beloborodov S. M., Kovaliov A. Yu. � Simulation-calculated method of rotor balancing

A new method of rotor balancing is suggested, which reduces assembly unbalance number. It is shown that residual number of the assembly unbalance is conditional only on inaccuracy of eccentricity measurement and imitating plummet weighing.
Key words: vibration level, balancing, rotor, simulation-calculated method

TESTING AND DIAGNOSTICS METHODS IN ENGINEERING INDUSTRY

Moskaliov V. S., Popov Ye. D., Zagoryansky O. A. � Thermodiagnostics of a turbo-driven pump assembly

It is shown that thermometric method of determining energy characteristic of pumps and turbines based on specific enthalpy change determination of working medium gone through unit allows controlling both technical state and operating conditions of the unit.
Key words: turbo-driven pump assembly, thermodiagnostics, energy characteristic

PROCESSES AND PRODUCTION AUTOMATION AND CONTROL, CAD SYSTEMS

Karasiov K. S., Feofanov A. N. � Control automation of the product quality and plant functioning ratings

Concept definitions of quality and quality of product relating to notions of property and utility of a product are given. Product control methods, having an effect on the activity of an enterprise are described.
Key words: plant, product quality, control automation

Koroliov D. A., Romashin V. G., Shadrin A. P., Nepovinnykh O. V., Rogov V. A. � Adaptive control system of tool displacement drive at machining

The elaborated adaptive control system of the tool driving is considerate. The purpose for the elaborated system realization is presented. The results of practical uses the adaptive control system are adduced.
Key words: adaptive control system, numerical control system, mechanical operation, radome, ceramics

MATHEMATICAL MODELLING, CALCULUS OF APPROXIMATIONS AND SOFTWARE SYSTEMS

Panchenko Ye. V., Alexeyev P. A., Turkin K. A., Semionova R. O. � Process modelling of the geometrically-complex shell obtaining by super plastic shaping from tube stock

Mathematical modelling results of the geometrically-complex shell superplastic shaping from tube stock are adduced. Process-dependent parameters of the form change and final geometrical parameters of the variable section shell from the alloy ��6 (AMg6) are established.
Key words: tube stock, super plastic shaping, finite elements method, loading programme, shaping matrix

ECONOMICS OF THE ENGINEERING INDUSTRY AND PRODUCTION ORGANIZATION

Kurbanmagomedov K. D. � Decision-making organization at management and control indistinct information processing in machine-building production

To solve management and control task in machine-building production it is necessary to apply methods of algorithm paralleling on the base of fuzzy approach use and associative parallel processors as hardware.
Key words: machine-building production, management and control, control algorithm, memory block

EDUCATION AND PERSONNEL TRAINING

Tibabisheva L. A., Tibabishev A. Yu., Kondratyeva Ye. V. � Personnel training system development taking into consideration plan for progress of the machine-building industry plants

Using the opportunities of information technologies in training, coordinated with the program of development of the enterprises of machine-building production, has created an information infrastructure that includes an information portal that provides service, consulting and information support, processing and storage of databases of methodological content of electronic educational resources (ESM), the management an electronic distance learning, electronic library.
Key words: information technology, training, system of electronic distance learning

FOREIGN EXPERIENCE

Potapova G. S. � Review of the foreign journals

INFORMATION

Ivanov A. N. � The 11th International exhibition "High Technology of XXI"

* * *

Events to be held in October�December, 2010

��: 127015, ��, �/� 65.
��.: +7 (495) 640-7903
e-mail: ic@ic-tm.ru

� 2008-2024, ��
�� - www.itsite.ru