e6

	Journal "Svarochnoe Proizvodstvo"	ISSN 0491-6441
	Contents (�6 2015)
to russian

SCIENTIFIC-TECHNICAL SECTION

Krivonosova E. A. � Prediction of the welding joint metall properties on the results of quantitative structure parameterization

The studies of welding joints structure formation by using the fractal analysis method are fulfiled, quantitative criteria of the welding joints metal structural uniformityare established.
Key words: welding physical metallurgy, welding joints struccture formation, fractal analysis, structural homogeneity criteria

Razmyshlyaev A. D., Ageeva M. V., Yarmonov S. V., Vydmysh P. A. � Modeling of the transverse magnetic field generated by means of arc welding devices

It is shown that at input devices design (ID) optimization of the transverse magnetic field (TMF) for arc welding is possible to use a modelling method of the constant magnetic field generated by the ID TMF, the electric current field flowing in the flat model from electrically conductive materials.
In this case, the electric field power lines when the current flows in a model environment conform to the magnetic field power lines (lines of induction) generated by the ID TMF. Through the use of this modelling method is established, that in order to achieve the maximum values of the magnetic field transverse component in the welding arc zone, electrode drops and liquid metal weld pool such ID TMF designs are optimum, in which the rods angle inclination to the vertical is 45�, and the rods end surfaces have chamfers parallel to the plane of the plates to be welded.
Key words: arc welding, induction of a transverse magnetic field, magnetic fields modeling

Belyaev A. I., Terentev A. V., Mikhaylitsyn S. V. � Technology features of the hypereutectoid steels welding deposit

The results of research on welding hypereutectoid steel with the purpose of increasing the strength of the deposited layer and its durability are given.
Key words: hypereutectoid steel, facing, microstructure, crack, strength

Efimenko L. A., Kapustin O. E., Merkulova A. O., Subbotin R. A., Puyko O. S., Shchekalova A. A. � Features of the austenite decomposition kinetics during heat treatment of punch-welding parts made from steel 10G2FBYU

From a features study of the austenite decomposition kinetics during heat treatment of connecting parts from steel 10G2FBYU the conditions providing strength of the stamp-welding connecting parts at the main metal level are established.
Key words: austenite decomposition kinetics, connecting parts, heat treatment

Zemlyakov E. V., Babkin K. D., Klimova O. G., Turichin G. A., Elkin V. N. � The remote laser welding technology ot the joints "tube�tube sheet" in the production of heat-exchange equipment

The article presents results of the technological research and design development directed at the introduction of modern high-performance welding processes in the production cycle of heat exchangers manufacturing. The optimum operating parameters of the remote laser welding for joints "tube�tube sheet" from stainless steel, titanium-based alloys and copper are established. Developed Specialized technological tooling and technological complex for laser welding of "tube�tube sheet" joints are developed.
Key words: remote laser welding, technology and equipment, tube sheet, heat exchanger

PRODUCTION SECTION

Chigarev V. V., Malinov V. L., Zusin A. M. � Flux composition improvement for welding deposit of the chrome-manganese steels

The results of investigations of the influence of the chemical composition of the flux used for welding flux-cored wires for the weld metal of the metastable austenite.
Key word: surfacing, metastable austenite, cored wires, flux

Sidorov V. P., Motorin K. V., Korotkova G. M. � Constricted arc welding points with a hole

Experimental and testing results of spot welded lapped joints from aluminum alloy with the sheets burning hole and holes formation on the point center of a diameter of 3 to 6,5 mm are adduced. The tensile strength increase by 35�45 % is established for weld nugget with hole.
Key words: spot welding, lapped joints, aluminum alloy

Akhunova A. Kh., Valitova E. V., Dmitriev S. V., Valitov V. A., Lutfullin R. Ya. � Mathematical modeling of the surface relief pattern effect on the plastic deformation localization in the pressure welding zone

This paper analyzes the characteristics of plastic deformation at the junction of dissimilar heat resistant materials by welding pressure in the presence of variable depth of the relief on the welded surfaces by using the finite element method. It is shown that welding quality can be improved by choosing a large relief depth away from the edges of the welded surfaces.
Key words: pressure welding, finite element analysis, welded surface relief

Volkov S. S., Shestel L. A., Sokolov V. A. � Termoultrasonic welding of the elastic capacity from the fluoroplast film

It is shown that the use of ultlasonic welding of thermo-elastic tank in the technological welding process and a rational sequence of assembly and welding operations have improved welding productivity, improve the quality and strength of welded joints, while reducing material and labor losses from marriage.
Key words: fluoroplastic, welding pressure, waveguide, amplitude, thermo ultrasonic welding, strength, temperature

Shtennikov V. N. � Semiautomatic brazing of the chips

The technology of semi-automatic soldering chips to the pads of multi-layer printed circuit boards, located on different levels. Pull-off force of the conclusions chip pads are not lower than the mechanical strength of solder joints made by hand.
Found that for optimum soldering temperature must be taken into account, as its temperature to soldering and brazing rod diameter and its length.
Key words: semi-contact soldering, chip, multi-layer printed circuit board, temperature, thin sections of solder joints, solder

ECONOMICS AND PRODUCTION ORGANIZATION

Leonov G. P., Panin V. N. � Features of the welding production organization in connection with the legislation implementation on technical regulation

Based on a brief analysis of the relationship technical regulations with the standards of the corresponding levels and their importance in achieving a major goal � namely, safety of the final product.
The requirements to the organization of assembly-welding production, which was built on the basis of international principles are formulated on the grounds of brief analysis of the technical regulations relationship with the standards of the corresponding levels and their importance in achieving a major goal � namely, safely of the final product.
These requirements concern to the following main aspects:
� the production organization compliance not only the requirements of ISO 9001, but ISO 3834 as a basic standard with regard to the welding production;
� SMK welding production must be regarded as a complete system that combines general purpose of a11 significant quality components, as well as be outsectirial;
� the individual characteristics of each industry or enterprise should be reflected in the relevant industry or enterprise regulatory documentation;
� attention is accentuated on the welding head personal responsibility for the accsepted decisions, the competence of which must correspond with the requirements of ISO 14731.
A brief commentary concerning other approaches to welding production organization distinct from the international are adduced.
Key words: technical regulation, technical regulations, welding production, standards, quality management system, certification

INFORMATION

Suslov An. A. � l2th International Exhibition and Conference "Coatings and Surface Treatment" � Expo Coating Moscow�2015

* * *

A.I. Akulov

BIBLIOGRAPHY

Contents of the foreign journals on welding

RF patents for the inventions in the field of welding

��: 127015, ��, �/� 65.
��.: +7 (495) 640-7903
e-mail: ic@ic-tm.ru

� 2008-2024, ��
�� - www.itsite.ru